Heavy Duty Gas Inlet Casing Turbocharger Spare Parts Mixed Flow Turbine Type

Heavu Duty Gas Inlet Casing , Turbocharger Spare Parts Mixed Flow Turbine Type

1. Increase of the compressor pressure ratio
2. High efficiency
3. Low noise emissions
4. Simple installation to the engine
5. Easy maintenance
6. Long service life
7. wide application: Marine propulsion, excavators, locomotives, power generation, off-road vehicles, machanical drive, mining, marine gensets.

Brief introduction of Marine turbocharger:

Marine turbocharger/Exhaust gas turbochargers operate at high speeds, high exhaust gas temperatures, high air and exhaust gas flow rates, and high flow rates.

Generally, the pressure of the exhaust gas is 0.25-0.45 MPa, and the exhaust gas temperature is 500-600 °C. The speed varies with the size of the Marine turbocharger / supercharger.

The maximum speed of the large-sized supercharger is 10000 r/min, and the maximum speed of the small-sized supercharger can reach 40,000~50000r/min.

Therefore, the marine turbocharger/exhaust gas turbocharger is a precision machine.

When the diesel-exhaust turbocharger combination is in operation, the marine turbocharger/exhaust gas turbocharger is prone to failures such as turbine casing corrosion, bearing damage, blade damage, gas seal damage, and supercharger vibration.

The daily good maintenance management can reduce these failures.

• High efficiency and small size;
• Lower fuel consumption;
• pressure lubricated internal bearings;
• lubricated via the engine oil systme of the engine;
• The T- CR series turbochargers are used on high-speed diesel engines and on gas engines.
• Applicated in Marine engine, rail as well as earth-moving and mining equipment